Quality Milton GA septic system installers do a great deal of legwork, long before a unit gets installed into the ground. A new unit will last many years, and possibly even generations, if it’s placed the right way, but it can malfunction instantaneously if it’s not. Additionally, all Milton GA septic system installers must obtain a permit in order to do the install, and may will have to partner with city or county officials to show that certain tests were performed in order to progress. These three tests are necessary initial steps that should always be taken before any task or designs are done, and it may also be helpful to perform them before you purchase a property, so you could be assured that a tank and leach field will be permitted.
1. Pit
The pit test is pretty straightforward. During the course of this test, a hole is excavated and the soil is analyzed to determine its structure. A conventional leach field is dependent on the soil’s composition to drain efficiently. If there is a considerable amount of gravel or sand, your leach field should be capable to discharge the effluent (water) from the tank well, where the soil will finish sanitizing it. If the soil has a considerable amount of clay or rock, it won’t sink well, therefore a standard leach field will not be an option. If the location you’ve selected does not pass the pit test, you may be able to pick another site on your property or use an alternate kind of drain field, like a mound system.
2. Perc
The perc, or percolation test, involves digging a 14-inch deep hole, adding a 2-inch layer of sand or gravel, and then filling it with water. The hole is normally left soaked for about two hours, and refilled as needed. Then, the hole is filled with 6 inches of water and monitored for water drainage.
3. Visual
There are several things an inspector will investigate visually. Most units are gravity-fed, so they don’t depend on electricity or pumps to transfer effluent from the tank to the leach field. Because of this, the slope of the ground is essential. An inspector will also seek out slopes that could feed excessive water into the leach field, as well as nearby bodies of water, the water table, and distance from the proposed unit to things like the home and wells.
Choose Quality Milton GA Septic System Installers Now
Picking the right layout, type of system, and evaluating the land effectively, are all essential procedures in making sure an install goes off without a hitch. Most significantly, these steps ensure that the install is done correctly, so that a system provides many years of use without issue. If you’re preparing for an install, call Septic Tank Pros Flowery Branch. Our professionals are skilled and committed to quality, so you could be sure the job is done right. Call (470) 798-3733 today.